1997 Toyota Tercel 4D Sedan, StandardFACTORY OEM SERVICE PROCEDURE

Fuel Pump

NOTE: Fuel pump performance measures fuel pressure, not regulated fuel pressure.
FUEL PUMP PERFORMANCE

Application Pressure psi (kg/cm2 )
Tercel (1) 44-50 (3.1-3.5)
(1) Check fuel pressure with engine off and using scan tool connected to data link connector No. 3 with ignition on to activate fuel pump or by connecting battery voltage to terminals on electric fuel pump.
REGULATED FUEL PRESSURE

Application At Idle W/Vacuum psi (kg/cm2 ) At Idle W/O Vacuum psi (kg/cm2 )
Tercel (1) (1)
(1) Fuel pressure should be 44-50 psi (3.1-3.5 kg/cm2 ) with engine idling. Fuel pressure regulator is not vacuum controlled, as fuel pressure regulator is mounted on in-tank fuel pump.
FUEL PUMP RESISTANCE

Application Ohms
Tercel .2-3.0
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.