Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Toyota 4Runner Base, RWD, StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 7.00 OZS. | 0.2 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.40 LBS. | 0.63 KG | R-134a | S | |||
| Automatic Transmission Fluid | RWD | Drain and Refill | 1.70 QTS. | 1.6 L | Automatic Transmission Fluid DEXRON II | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Clutch Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Rear,w/o Rear Differential Lock System | 2.60 QTS. | 2.46 L | API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) | S | ||
| Differential Gear Oil | Rear,w/Rear Differential Lock System | 2.90 QTS. | 2.74 L | API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) | S | ||
| Differential Gear Oil | RWD | 2.90 QTS. | 2.74 L | API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) | S | ||
| Engine Coolant | 2.7L Eng | w/o Rear Heater | 10.60 QTS. | 10.03 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | DO NOT use alcohol type antifreeze or plain water alone. | S |
| Engine Coolant | 2.7L Eng | w/Rear Heater | 11.60 QTS. | 10.97 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | DO NOT use alcohol type antifreeze or plain water alone. | S |
| Engine Oil | 2.7L Eng | Drain and Refill,w/Filter | 5.70 QTS. | 5.39 L | SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (Above 0Deg.F) | S | |
| Engine Oil | 2.7L Eng | Drain and Refill,w/o Filter | 5.00 QTS. | 4.73 L | SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (Above 0Deg.F) | S | |
| Fuel Tank | 18.50 GALS. | 70.03 L | S | ||||
| Manual Transmission Fluid | 2.7L Eng,RWD | 2.70 QTS. | 2.55 L | API - GL-4 or GL-5, SAE 75W-90 | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON II or DEXRON III | S | |||
| Transfer Case Fluid | 1.10 QTS. | 1.04 L | Hypoid Gear Oil API - GL-4 or GL-5 SAE 75W-90 | S | |||
| Windshield Washer Fluid | N/A | N/A | Plain water | In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.