Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Toyota Pickup BaseFACTORY OEM SERVICE PROCEDURE
Anti-Lock Brake System DTCS
ANTI-LOCK BRAKE SYSTEM DTCS
| OEM Code | Description |
|---|---|
| Code 11 | Open in ABS relay circuit |
| Code 12 | Short in ABS relay circuit |
| Code 25 | Short in solenoid circuit |
| Code 33 | Open or short in speed sensor circuit |
| Code 41 | Battery voltage is 9 |
| Code 42 | Battery voltage is 17 volts or more |
| Code 43 | Mechanical malfunction of deceleration sensor |
| Code 44 | Electrical malfunction of deceleration sensor circuit |
| Code 73 | Low output voltage signal from speed sensor |
| Code 77 | Abnormal signal from speed sensor |
| Code 79 | Sticking of deceleration sensor pendulum |
| ABS Light Always On | Malfunction of ABS ECU |
| Light Blinks 4 Times Per Second | Speed sensor and differential ring gear are normal |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.