1994 Toyota Pickup BaseFACTORY OEM SERVICE PROCEDURE

Park/Neutral Switch: Notes

NOTE: If vehicle will not start with shift lever in Park/Neutral position, verify correct park/neutral switch adjustment. If park/neutral switch is correctly adjusted, verify switch continuity.
PARK/NEUTRAL SWITCH CONTINUITY SPECIFICATIONS

Gearshift Position Continuity Between Terminals
Park "B" & "N", "C" & PL
Reverse "C" & RL
Neutral "B" & "N", "C" & NL
Drive "C" & DL
2 "C" & 2L
Low "C" & LL
Fig 1: Identifying Park/Neutral Switch Terminals
G94A45922Courtesy of Β© TOYOTA, LICENSE AGREEMENT TMS1002
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.