Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Toyota Corolla Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | |||||
|---|---|---|---|---|---|---|---|
| Camber (1) | |||||||
| Front | -0.17 | -0.67 To 0.33 | |||||
| Rear | -0.92 | -1.42 To 0.42 | |||||
| Caster (1) | 1.33 | 0.83 To 1.83 | |||||
| Steering Axis Inclination (1) | 12.58 | N/A | |||||
| Toe-In (2) | |||||||
| Front | 0.04 (1) | 0 To 0.08 (0 To 2) | |||||
| Rear | 0.12 (3) | 0.08 To 0.16 (2 To 4) | |||||
| Toe-In (1) | |||||||
| Front | 0.10 | -0.1 To 0.3 | |||||
| Rear | 0.3 | 0.2 To 0.4 | |||||
| Toe-Out On Turns (1) | |||||||
| Inner | 39 | N/A | |||||
| Outer | 33 | N/A | |||||
|
|||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
