Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Toyota Corolla Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Torque Specifications
CAM POSITION SENSOR & DISTRIBUTOR TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Distributor Hold-Down Bolt | 15 (20) |
FUEL INJECTION TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Cold Start Injector Fuel Pipe Union Bolt | 13 (18) |
| Fuel Inlet Hose-To-Fuel Rail Bolt | 22 (30) |
| Fuel Rail-To-Cylinder Head Bolt | 11 (15) |
| INCH Lbs. (N.m) | |
| Cold Start Injector-To-Air Intake Chamber Bolt | 82 (9.3) |
| Fuel Pressure Regulator Mounting Bolts | 82 (9.3) |
FUEL PUMP TORQUE SPECIFICATIONS
| Application | INCH Lbs. (N.m) |
|---|---|
| Fuel Pump Bracket Retaining Screws | 30 (3.4) |
THROTTLE BODY TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Corolla | 16 (22) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.