Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Toyota Previa LE, AWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | Front & Rear | 2.69 LBS. | 1.22 KG | R-12 | S | ||
| Air Cond Refrigerant | Front | 2.13 LBS. | 0.96 KG | R-12 | S | ||
| Automatic Transmission Fluid | Drain and Refill | 2.50 QTS. | 2.36 L | Automatic Transmission Fluid DEXRON II | S | ||
| Automatic Transmission Fluid | Dry Fill | 6.00 QTS. | 5.67 L | Automatic Transmission Fluid DEXRON II | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 1.60 QTS. | 1.51 L | API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) | S | |||
| Engine Coolant | w/o Towing Package | 12.30 QTS. | 11.64 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | DO NOT use alcohol type antifreeze or plain water alone. | S | |
| Engine Coolant | w/Towing Package | 13.00 QTS. | 12.3 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | DO NOT use alcohol type antifreeze or plain water alone. | S | |
| Engine Oil | Drain and Refill,w/Filter | 6.10 QTS. | 5.77 L | SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) | S | ||
| Engine Oil | Drain and Refill,w/o Filter | 5.80 QTS. | 5.48 L | SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) | S | ||
| Fuel Tank | 19.80 GALS. | 74.95 L | S | ||||
| Manual Transmission Fluid | 2.30 QTS. | 2.17 L | API - GL-4 or GL-5, SAE 75W-90 | S | |||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON II | S | |||
| Transfer Case Fluid | 1.40 QTS. | 1.32 L | Multipurpose Gear Oil API - GL-4 or GL-5, SAE 75W-90 | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
