1992 Toyota Previa LE, AWDFACTORY OEM SERVICE PROCEDURE

Engine Controls - Specifications: Capacities

BATTERY SPECIFICATIONS

Application Amp Hr. Rating
Previa 65
CAUTION: Some transaxles require that differential must be filled separately from the transaxle. A special amount of lubricant is required for the differential.
FLUID CAPACITIES

Application Quantity
Crankcase (Includes Filter) 6.1 Qts. (5.8L)
Cooling System (Includes Heater)
With Tow Package 12.3 Qts. (11.6L)
Without Tow Package 13.0 Qts. (12.3L)
Manual Transmission (SAE 75W-90/API GL-5)
2WD 2.3 Qts. (2.2L)
4WD 2.7 Qts. (2.6L)
Automatic Transmission (Dexron-II)
Dry Refill 6.0 Qts. (5.7L)
Drain & Refill 2.5 Qts. (2.4L)
Differential (SAE 80W-90/API GL-5)
2WD 1.6 Qts. (1.5L)
4WD
Front 1.1 Qts. (1.0L)
Rear 1.6 Qts. (1.5L)
Transfer Case (SAE 75W-90/API GL-5) 1.4 Qts. (1.3L)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.