Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Toyota Land CruiserFACTORY OEM SERVICE PROCEDURE
Trouble Code Identification Charts
LAND CRUISER CODE IDENTIFICATION
| Code No. | System Affected | Probable Cause | ||||
|---|---|---|---|---|---|---|
| 12 & 13 | RPM Signal | Distributor Or Ckt, Starter Ckt, ECU | ||||
| 14 | Ignition Signal | Ignitor And Ignition Coil Or Ckt To ECU, ECU | ||||
| 21 | Oxygen Sens (No. 1) Signal | Oxygen Sens Or Ckt, Oxygen Sens Heater, ECU | ||||
| 22 | Coolant Temp Sens Signal | Coolant Temp Sens Or Ckt, ECU | ||||
| 24 (1) | Intake Air Temp Sens Signal | Intake Air Temp Sens Or Ckt, ECU | ||||
| 25 | Lean Air/Fuel Mixture | Loose Ground, Injector Or Ckt, Oxygen Sens Or Ckt, Fuel Pressure, Ignition Sys, Coolant Temp Sens, Airflow Meter, ECU | ||||
| 26 | Rich Air/Fuel Mixture | Loose Ground, Injector Or Ckt, Oxygen Sens Or Ckt, Fuel Pressure, Cold Start Injector Or Ckt, Coolant Temp Sens, Airflow Meter, Compression Pressure, ECU | ||||
| 28 | Oxygen Sens (No. 2) Signal | Oxygen Sens Or Ckt, Oxygen Sens Heater, ECU | ||||
| 31 & 32 | Airflow Meter Signal | Airflow Meter Or Ckt, ECU | ||||
| 35 | High Altitude Compensator Signal | ECU | ||||
| 41 | Throttle Position Sens Signal | Throttle Position Sens Or Ckt, ECU | ||||
| 42 | Vehicle Speed Sens Signal | Vehicle Speed Sens Or Ckt, ECU | ||||
| 43 | Starter Signal | Starter Signal Ckt, Ignition Switch Or Ckt, ECU | ||||
| 51 | Switch Condition Signal | A/C Switch Ckt, Neutral/Start Switch Or Ckt, TPS Or Ckt, ECU | ||||
| 71 (2) | EGR Sys Malfunction | EGR Sys, EGR Temp Sens Or Ckt, EGR-VSV, ECU | ||||
|
||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
