1991 Toyota Corolla Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Ignition Timing

IGNITION TIMING (1)

Application (2) Base Timing Advance Timing
Camry & Celica
1.6L 10 @ Idle 5-15 @ Idle
2.0L 10 @ 750 14-19 @ Idle
2.2L 10 @ 700 13-22 @ Idle
Corolla
4A-FE 10 @ 800 5-15 @ Idle
4A-GE 10 @ 800 16 @ Idle
MR2
2.0L 10 @ Idle 12-21 @ Idle
2.2L 10 @ Idle 13-22 @ Idle
Pickup & 4Runner 5 @ Idle 10-14 @ Idle
Previa 5 @ Idle 12 @ Idle
Tercel 10 @ Idle 7-17 @ Idle
(1) Degrees BTDC @ RPM
(2) With check connector terminals TE1 and E1 jumpered.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.