Quick Lookups: Fluids

1990 Toyota Pickup Base, 22RSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 1.63 LBS. 0.73 KG R-12 S
Automatic Transmission Fluid 2.4L Eng,RWD Drain and Refill 2.50 QTS. 2.36 L Automatic Transmission Fluid DEXRON II S
Automatic Transmission Fluid 2.4L Eng,RWD Dry Fill 6.90 QTS. 6.52 L Automatic Transmission Fluid DEXRON II S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil 2.4L Eng,RWD 1.40 QTS. 1.32 L API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) S
Differential Gear Oil Rear 2.30 QTS. 2.17 L API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) S
Engine Coolant 2.4L Eng,Standard Trans 8.90 QTS. 8.42 L 50/50 mixture of Ethylene Glycol Antifreeze and water DO NOT use alcohol type antifreeze or plain water alone. S
Engine Oil 2.4L Eng Drain and Refill,w/Filter 4.50 QTS. 4.25 L SAE 5W-30 (Below 50Deg.F), 10W-30/40 (Above 0Deg.F) S
Engine Oil 2.4L Eng Drain and Refill,w/o Filter 4.00 QTS. 3.78 L SAE 5W-30 (Below 50Deg.F), 10W-30/40 (Above 0Deg.F) S
Engine Oil 2.4L Eng Dry Fill 5.10 QTS. 4.82 L SAE 5W-30 (Below 50Deg.F), 10W-30/40 (Above 0Deg.F) S
Fuel Tank RWD,Pickup 13.70 GALS. 51.86 L S
Manual Transmission Fluid 2.4L Eng,4 Spd Trans,RWD 2.50 QTS. 2.36 L API - GL-4 or GL-5, SAE 75W-90 S
Manual Transmission Fluid 2.4L Eng,RWD 2.50 QTS. 2.36 L API - GL-4 or GL-5, SAE 75W-90 S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON II S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.