Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1990 Toyota Corolla Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | N/A | N/A | R-12 | For further details see "Air conditioner specification label". | S | ||
| Automatic Transmission Fluid | 3 Spd Trans | Drain and Refill | 2.60 QTS. | 2.46 L | Automatic Transmission Fluid DEXRON II | S | |
| Automatic Transmission Fluid | 3 Spd Trans | Dry Fill | 5.80 QTS. | 5.48 L | Automatic Transmission Fluid DEXRON II | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 3 Spd Trans | 1.50 QTS. | 1.41 L | Automatic Transmission Fluid DEXRON II | S | ||
| Engine Coolant | Eng CD 4A-FE,Automatic Trans,3 Spd Trans | 5.80 QTS. | 5.48 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | DO NOT use alcohol type antifreeze or plain water alone. | S | |
| Engine Oil | 1.6L Eng | Drain and Refill,w/o Filter | 3.20 QTS. | 3.02 L | SAE 5W-30 (Below 50Deg.F), 10W-30/40 (Above 0Deg.F) | S | |
| Engine Oil | Eng CD 4A-FE | Drain and Refill,w/Filter | 3.40 QTS. | 3.21 L | SAE 5W-30 (Below 50Deg.F), 10W-30/40 (Above 0Deg.F) | S | |
| Engine Oil | Eng CD 4A-FE | Dry Fill | 4.20 QTS. | 3.97 L | SAE 5W-30 (Below 50Deg.F), 10W-30/40 (Above 0Deg.F) | S | |
| Fuel Tank | 13.20 GALS. | 49.96 L | S | ||||
| Manual Transmission Fluid | 2.70 QTS. | 2.55 L | API - GL-4 or GL-5, SAE 75W-90 or 80W-90 | S | |||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON II | S | |||
| Transfer Case Fluid | 0.80 QTS. | 0.75 L | API - GL-5, SAE 75W-90 | S | |||
| Windshield Washer Fluid | N/A | N/A | Plain water | In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.