Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1990 Toyota Corolla Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Engine Compression Specifications
COMPRESSION SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Compression Ratio | |||
| Camry & Celica | |||
| 3S-FE | 9.3:1 | ||
| 3S-GTE | 8.8:1 | ||
| 4A-FE | 9.5:1 | ||
| 5S-FE | 9.5:1 | ||
| Corolla | |||
| 4A-FE | 9.5:1 | ||
| 4A-GE | 10.3:1 | ||
| Pickup & 4Runner | 9.3:1 | ||
| Tercel | 9.3:1 | ||
| Normal Compression Pressure | |||
| Celica (Turbo) | 128 psi (9.0 kg/cm2 ) | ||
| Corolla | 191 psi (13.4 kg/cm2 ) | ||
| Pickup & 4Runner | 171 psi (12.0 kg/cm2 ) | ||
| Tercel | 185 psi (13.0 kg/cm2 ) | ||
| All Others | 178 psi (12.5 kg/cm2 ) | ||
| Minimum Compression Pressure | |||
| Celica (Turbo) | 164 psi (11.5 kg/cm2 ) | ||
| All Others | 142 psi (10.0 kg/cm2 ) | ||
| Maximum Variation Between Cylinders | 14 psi (1.0 kg/cm2 ) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.