Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1988TERCEL BASE, 2D HATCHBACK, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCEIGNITION SYSTEMTESTINGDISTRIBUTOR ADVANCE SPECIFICATIONS
1988 Toyota Tercel Base, 2D Hatchback, Standard
Distributor Advance Specifications
1988 Toyota Tercel Base, 2D Hatchback, StandardSECTION Distributor Advance Specifications
TERCEL SEDAN (3E) DISTRIBUTOR MECHANICAL ADVANCE SPECIFICATIONS
| RPM | Degrees |
|---|---|
| 550 | Advance Begins |
| 700 | 0.1-1.6 |
| 1150 | 3.2-4.7 |
| 2050 | 8.8-10.3 |
| 2550 | 11.1-12.6 |
| 3300 | 12.1-14.1 |
TERCEL SEDAN (3E) DISTRIBUTOR VACUUM ADVANCE SPECIFICATIONS
| In. Hg | Degrees | |
|---|---|---|
| Main & Sub | ||
| 3.9 | Advance Begins | |
| 5.1 | 0.7-4.2 | |
| 9.8 | 10.0-13.4 | |
| 14.9 | 14.0-16.0 | |
| Sub | ||
| 11.8 | Advance Begins | |
| 12.6 | 0.3-3.1 | |
| 13.4 | 1.9-4.7 | |
| 17.3 | 4.0-6.0 | |
TERCEL WAGON (3A-C) DISTRIBUTOR MECHANICAL ADVANCE SPECIFICATIONS
| RPM | Degrees |
|---|---|
| 550 | Advance Begins |
| 800 | 3.0 |
| 1417 | 5.4 |
| 2600 | 11.5 |
| 300 | 11.1 |
TERCEL WAGON (3A-C) DISTRIBUTOR VACUUM ADVANCE SPECIFICATIONS
| In. Hg | Degrees | |
|---|---|---|
| Main | ||
| 3.2 | Advance Begins | |
| 7.3 | 7.7 | |
| 11.0 | 13.0 | |
| Sub | ||
| 7.9 | Advance Begins | |
| 10.2 | 4.0 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.