Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1987 Toyota 4Runner SR5, 22-RTEFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.69 LBS. | 0.76 KG | R-12 | S | |||
| Automatic Transmission Fluid | 2.4L Eng | 4.80 QTS. | 4.54 L | Automatic Transmission Fluid DEXRON II | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 2.4L Eng | 1.70 QTS. | 1.6 L | API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) | S | ||
| Differential Gear Oil | 2.4L Eng | Rear | 2.30 QTS. | 2.17 L | API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) | S | |
| Engine Coolant | 2.4L Eng | 8.90 QTS. | 8.42 L | Ethylene glycol coolant (Do not use alcohol type) | S | ||
| Engine Oil | 2.4L Eng | w/Filter | 4.50 QTS. | 4.25 L | SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 or 20W-40/50 (Above 10Deg.F) | S | |
| Engine Oil | 2.4L Eng | w/o Filter | 4.00 QTS. | 3.78 L | SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 or 20W-40/50 (Above 10Deg.F) | S | |
| Fuel Tank | 2.4L Eng | 17.20 GALS. | 65.1 L | S | |||
| Manual Transmission Fluid | 2.4L Eng | 4.10 QTS. | 3.88 L | API - GL-4 or GL-5, SAE 75W-90 or 80W-90 | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON or DEXRON II | S | |||
| Transfer Case Fluid | 2.4L Eng | 1.20 QTS. | 1.13 L | Automatic Transmission Fluid DEXRON II | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.