1985 Toyota Tercel BaseFACTORY OEM SERVICE PROCEDURE

Alignment Specifications

WHEEL ALIGNMENT SPECIFICATIONS (CAMRY)

Application Specification
Front
Caster (Degrees) +1 +/- 1/2
Camber (Degrees) +9/16 +/- 1/2
Toe-in (Inches) +3/32 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 38
Outer 30
Rear
Caster (Degrees) N/A
Camber (Degrees) (1) +1/2 +/- 1/2
Toe-in (Inches) +5/32 +/- 3/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Radial tire specifications only.
WHEEL ALIGNMENT SPECIFICATIONS (CELICA)

Application Specification
Front
Manual Steering
Caster (Degrees) +3 3/8 +/- 1/2
Camber (Degrees) +15/16 +/- 1/2
Toe-in (Inches) +5/32 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 36
Outer 29
Power Steering
Caster (Degrees) +3 1/3 +/- 1/2
Camber (Degrees) +11/12 +/- 1/2
Toe-in (Inches) +3/16 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 36
Outer 29
Rear
Caster (Degrees) N/A
Camber (Degrees) (1) -5/32 +/- 1/2
Toe-in (Inches) 0 +/- 3/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Not adjustable.
WHEEL ALIGNMENT SPECIFICATIONS (COROLLA)

Application Specification
FWD
Front
Caster (Degrees) +15/16 +/- 1/2
Camber (Degrees) -1/2 +/- 1/2
Toe-in (Inches) 0 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 40
Outer 33
Rear
Caster (Degrees) N/A
Camber (Degrees) (1) -1/2 +/- 1/2
Toe-in (Inches) +5/32 +/- 3/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
RWD
Manual Steering
Caster (Degrees) +2 3/4 +/- 1/2
Camber (Degrees) +1/4 +/- 1/2
Toe-in (Inches) +1/32 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 38 1/2
Outer 33 1/2
Power Steering
Caster (Degrees) +3 11/16 +/- 1/2
Camber (Degrees) +1/4 +/- 1/2
Toe-in (Inches) +1/32 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 38 1/2
Outer 33 1/2
(1) Not adjustable.
WHEEL ALIGNMENT SPECIFICATIONS (CRESSIDA)

Application Specification
Front
Sedan
Caster (Degrees) +4 13/16 +/- 1/2
Camber (Degrees) +7/16 +/- 1/2
Toe-in (Inches) +3/32 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 38
Outer 31
Station Wagon
Caster (Degrees) +2 11/16 +/- 1/2
Camber (Degrees) +1/2 +/- 1/2
Toe-in (Inches) 0 +/- 1/32
Toe-Out on Turns (Degrees)
Inner 31
Outer 20
Rear
Caster (Degrees) N/A
Camber (Degrees) (1) -7/16 +/- 1/2
Toe-in (Inches) +1/8 +/- 3/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Not adjustable.
WHEEL ALIGNMENT SPECIFICATIONS (LAND CRUISER)

Application Specification
FJ, BJ, HJ4
Caster (Degrees) +1 +/- 3/4
Camber (Degrees) +1 +/- 3/4
Toe-in (Inches) +5/32 +/- 5/32
Toe-Out on Turns (Degrees)
Inner 29-32
Outer 30
FJ, BJ, HJ6
Caster (Degrees) +1 1/12 +/- 3/4
Camber (Degrees) +1 +/- 3/4
Toe-in (Inches) +5/32 +/- 5/32
Toe-Out on Turns (Degrees)
Inner 29-32
Outer 30
WHEEL ALIGNMENT SPECIFICATIONS (PICKUP)

Application Specification
2WD
Short Bed
Caster (Degrees) +2/3 +/- 1/2
Camber (Degrees) +1/2 +/- 1/2
Toe-in (Inches) (1) +11/32 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 22 1/4
Outer 20
Long Bed
Caster (Degrees) +1 1/6 +/- 1/2
Camber (Degrees) +1/2 +/- 1/2
Toe-in (Inches) (1) +3/4 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 22 1/4
Outer 20
Cab & Chassis
Caster (Degrees) +1 1/6 +/- 1/2
Camber (Degrees) +1/2 +/- 1/2
Toe-in (Inches) (1) +3/4 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 22 1/4
Outer 20
3/4 Ton
Caster (Degrees) +2/3 +/- 1/2
Camber (Degrees) +1/2 +/- 1/2
Toe-in (Inches) (1) +3/4 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 22 1/4
Outer 20
4WD
Caster (Degrees) +2 1/4 +/- 1
Camber (Degrees) +1 +/- 3/4
Toe-in (Inches) (1) +11/32 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 20 1/2
Outer 20
(1) Radial tire specifications only.
WHEEL ALIGNMENT SPECIFICATIONS (SUPRA)

Application Specification
Front
Caster (Degrees) +4 1/3 +/- 1/2
Camber (Degrees) +5/6 +/- 1/2
Toe-in (Inches) +3/4 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 37 7/12
Outer 30 3/4
Rear
Caster (Degrees) N/A
Camber (Degrees) -1/6 +/- 1/2
Toe-in (Inches) 0 +/- 13/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (TERCEL)

Application Specification
Front
2WD
Sedan
Manual Steering
Caster (Degrees) (1) +1 1/6 +/- 1/2
Camber (Degrees) +1/3 +/- 1/2
Toe-in (Inches) 0 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 21 1/2
Outer 20
Power Steering
Caster (Degrees) (1) +2 2/3 +/- 1/2
Camber (Degrees) +1/3 +/- 1/2
Toe-in (Inches) 0 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 21 1/12
Outer 20
Station Wagon
Manual Steering
Caster (Degrees) (1) +3/4 +/- 1/2
Camber (Degrees) +1/4 +/- 1/2
Toe-in (Inches) 0 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 21 5/12
Outer 20
Power Steering
Caster (Degrees) (1) +2 1/4 +/- 1/2
Camber (Degrees) +1/4 +/- 1/2
Toe-in (Inches) 0 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 21 +/- 1
Outer 20
4WD
Manual Steering
Caster (Degrees) (1) +2 5/12 +/- 1/2
Camber (Degrees) +5/6 +/- 1/2
Toe-in (Inches) 0 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 21 1/4
Outer 20
Power Steering
Caster (Degrees) (1) +2 5/12 +/- 1/2
Camber (Degrees) +5/6 +/- 1/2
Toe-in (Inches) 0 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 21 +/- 1/12
Outer 20
Rear
Sedan
Caster (Degrees) N/A
Camber (Degrees) -1/12 +/- 1/2
Toe-in (Inches) 0 +/- 13/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
Station Wagon
Caster (Degrees) N/A
Camber (Degrees) -1/6 +/- 1/2
Toe-in (Inches) 0 +/- 13/32
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Not adjustable.
WHEEL ALIGNMENT SPECIFICATIONS (VAN)

Application Specification
Caster (Degrees) +2 1/12 +/- 1/2
Camber (Degrees) +1/2 +/- 1/2
Toe-in (Inches) 0 +/- 11/32
Toe-Out on Turns (Degrees)
Inner 21
Outer 20
WHEEL ALIGNMENT SPECIFICATIONS (4RUNNER)

Application Specification
Caster (Degrees) +2 +/- 1
Camber (Degrees) +1 +/- 3/4
Toe-in (Inches) (1) +11/32 +/- 13/16
Toe-Out on Turns (Degrees)
Inner 20 1/2
Outer 20
(1) Radial tire specifications only.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.