SYS.OK|MANUAL.DB● LIVE
1983 Toyota Tercel DX, 2D Hatchback, Standard

Quick Lookups: Fluids

1983 Toyota Tercel DX, 2D Hatchback, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 1.56 LBS. 0.7 KG R-12 S
Automatic Transmission Fluid 1.5L Eng 2.30 QTS. 2.17 L Automatic Transmission Fluid DEXRON II S
Automatic Transmission Fluid 1.5L Eng w/o Converter 4.80 QTS. 4.54 L Automatic Transmission Fluid DEXRON II S
Differential Gear Oil 1.5L Eng 1.10 QTS. 1.04 L API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) S
Engine Coolant 1.5L Eng 5.60 QTS. 5.29 L Ethylene glycol coolant (Do not use alcohol type) S
Engine Coolant 1.5L Eng w/o Rear Heater 4.90 QTS. 4.63 L Ethylene glycol coolant (Do not use alcohol type) S
Engine Oil 1.5L Eng 3.90 QTS. 3.69 L SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 20W-40/50 (Above 10Deg.F) S
Engine Oil 1.5L Eng w/o Filter 3.20 QTS. 3.02 L SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 20W-40/50 (Above 10Deg.F) S
Engine Oil 1.5L Eng With Filter 3.50 QTS. 3.31 L SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 20W-40/50 (Above 10Deg.F) S
Fuel Tank 1.5L Eng 11.90 GALS. 45.04 L S
Manual Transmission Fluid 1.5L Eng 3.50 QTS. 3.31 L Hypoid gear oil API GL-5; Recommended viscosity: SAE 90 or 80W-90 (Above 0Deg.F), 80W-90 or 80 (Below 0Deg.F) S
Power Steering Fluid N/A N/A ATF DEXRON-DEXRON II S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.