2018 Tesla Model X 100DFACTORY OEM SERVICE PROCEDURE

MODEL X All Models

MODEL X All Models

Measurement Minimum Preferred Maximum
Left Front Caster (°) 3.7 4.2 4.7
Right Front Caster (°) 3.7 4.2 4.7
Left Front Camber (°) -1.2 -0.75 -0.3
Right Front Camber (°) -1.2 -0.75 -0.3
Front Toe (°) -0.3 0 0.3
Left SAI (°) 0 0 0
Right SAI (°) 0 0 0
Left Rear Camber (°) -2.5 -1.5 -0.5
Right Rear Camber (°) -2.5 -1.5 -0.5
Rear Toe (°) 0.1 0.4 0.7
Thrust Angle (°) 0 0 0
Left Toe Out, Inward (°) 0 0 0
Right Toe Out, Inward (°) 0 0 0
Left Toe Out, Outward (°) 0 0 0
Right Toe Out, Outward (°) 0 0 0
Left Max Turn, Inward (°) 0 0 0
Right Max Turn, Inward (°) 0 0 0
Left Max Turn, Outward (°) 0 0 0
Right Max Turn, Outward (°) 0 0 0
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.