2018 Tesla Model 3 BaseFACTORY OEM SERVICE PROCEDURE

Accelerator - Remove and Replace: Install

  1. Slide the accelerator up, and then install the accelerator into the bracket.
  2. Install the bolt that attaches the accelerator to the body.

    7 N.m (5.2 ft-lbs)Β 

    G14744483Courtesy of TESLA, INC.
  3. Connect the accelerator electrical connector.
    G14744480Courtesy of TESLA, INC.
  4. Install the LH footwell duct. See DUCT - FOOTWELL - LH (LHD) (REMOVE AND REPLACE) .
  5. Install the driver knee airbag. See AIRBAG - KNEE - DRIVER (REMOVE AND INSTALL) .
  6. Reconnect 12V/LV power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  7. Connect a laptop with Toolbox 3 to the vehicle.
  8. Run the following Toolbox routines to confirm pedal operation:
    • TEST-SELF_DI_X_ACCEL-PEDAL
    • PING-TP_PMR
    • TEST-SELF_PMR_X_CAN-COMS
  9. Install the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  10. Install the 2nd row lower seat cushion. See SEAT CUSHION - LOWER - 2ND ROW (REMOVE AND REPLACE) .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.