2017 Tesla Model 3 BaseFACTORY OEM SERVICE PROCEDURE

Tech Note: ATEQ TPMS Tool Software Update (TN-18-34-001)

Publication date: 2018-06-25
Reference number: TN-18-34-001
Supersedes refnos: TN-14-92-005

TECH NOTE: ATEQ TPMS TOOL SOFTWARE UPDATE

TECH NOTE: ATEQ TPMS TOOL SOFTWARE UPDATE

TECHNICAL INFORMATION TIPS

Reference Number(s): TN-18-34-001, Date of Issue:  June 25, 2018
TESLA: Model S, Model X, Model 3
VEHICLE SYSTEM: : Wheels & Tires.
TESLA, INC. : Tech Notes.
REGION: : All

TECH NOTES

Tech Notes are announcements that help to communicate and track new information about Tesla Service concerns. Such concerns may or may not be VIN specific. These instructions assume knowledge of motor vehicle and high voltage electrical component repairs, and should only be executed by trained professionals. Tesla assumes no liability for injury or property damage due to a failure to properly follow these instructions or for repairs attempted by unqualified individuals.

INSTALLING THE ATEQ TPMS WEBVT PROGRAM ON A WINDOWS PC

This section describes how to download the ATEQ TPMS WebVT software management program to receive the latest vehicle and sensor updates for the TPMS tool.

NOTE: The software installation requires a Windows PC and a file compression/decompression utility such a WinZip or 7-Zip.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.