Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Quick Lookups: Fluids
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.40 OZS. | 0.1 L | PAG 46 | S | |||
| Air Cond Refrigerant | 0.95 LBS. | 0.43 KG | R-134a | S | |||
| Automatic Transmission Fluid | 8.45 QTS. | 7.99 L | SUZUKI CVT Fluid Green 1 or SHELL Green -1V | S | |||
| Brake Fluid | N/A | N/A | Refer to Brake Fluid Cap on your vehicle for correct fluid specification. | S | |||
| Differential Gear Oil | Rear | 0.85 QTS. | 0.8 L | API - GL-5, SAE 80W-90 Hypoid Gear Oil | S | ||
| Engine Coolant | Automatic CVT Trans | w/Reserve Tank | 7.40 QTS. | 7 L | 50/50 mixture of SUZUKI Genuine Coolant or equivalent and demineralized or distilled water | S | |
| Engine Oil | w/Filter | 4.70 QTS. | 4.44 L | API - SAE 5W-30 | S | ||
| Fuel Tank | 4WD | 11.90 GALS. | 45.04 L | S | |||
| Manual Transmission Fluid | 2.64 QTS. | 2.49 L | SUZUKI Gear Oil 75W-80 or equivalent API - GL-4, SAE 75W-90 | S | |||
| Transfer Case Fluid | 0.63 QTS. | 0.59 L | API - GL-5, SAE 80W-90 Hypoid Gear Oil | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.