2012 Suzuki Equator PremiumFACTORY OEM SERVICE PROCEDURE

General Specification

GENERAL SPECIFICATION

Applied model QR25DE VQ40DE
2WD 4WD
Automatic transmission model RE5R05A
Transmission model code number 3EX3D 99X9E 3EX0A
Stall torque ratio 1.84:1 1.76: 1
Transmission gear ratio 1st 3.842
2nd 2.353
3rd 1.529
4th 1.000
5th 0.839
Reverse 2.765
Recommended fluid SUZUKI approved Matic S ATF(1)
Fluid capacity 10.3 liter (10-7/8 US qt, 9-1/8 Imp qt)
CAUTION: If SUZUKI approved Matic S ATF is not available, SUZUKI approved Matic J ATF may also be used, Using automatic transmission fluid other than SUZUKI approved Matic S ATF or Matic J ATF will cause deterioration in driveability and automatic transmission durability, and may damage automatic transmission, which is not covered by the SUZUKI new vehicle limited warranty.
(1) Refer to [RECOMMENDED FLUIDS AND LUBRICANTS ]
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.