Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Suzuki Equator BaseFACTORY OEM SERVICE PROCEDURE
Clutch Cover
CLUTCH COVER SPECIFICATION CHART
| Unit: mm (in) | ||
| Engine model | QR25DE | VQ40DE |
| Transmission Model | 5 M/T | 6 M/T |
| Set-load | 5890 N (600 kg, 1324 lb) | 8340 N (850 kg, 1875 lb) |
| Diaphragm spring lever height | 37.0 - 39.0 (1.457 - 1.535) | 44.0 - 46.0 (1.732 - 1.811) |
| Uneven limit of diaphragm spring toe height | 0.7 (0.028) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
