Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Suzuki Equator BaseFACTORY OEM SERVICE PROCEDURE
Transmission Fluid Temperature Sensor Specifications
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION FLUID TEMPERATURE SENSOR SPECIFICATIONS
| Temperature | Temperature | Minimum Resistance | Nominal Resistance | Maximum Resistance |
|---|---|---|---|---|
| °C | °F | Ω | Ω | Ω |
| -40°C | -40°F | 59500 | 77480 | 100000 |
| -30°C | -22°F | 39688 | 44000 | 48400 |
| -20°C | -4°F | 21731 | 25880 | 29006 |
| -10°C | 14°F | 13156 | 15730 | 17587 |
| 0°C | 32°F | 8299 | 9846 | 11735 |
| 10°C | 50°F | 5952 | 6445 | 6912 |
| 20°C | 68°F | 3802 | 4184 | 4601 |
| 30°C | 86°F | 2582 | 2829 | 3167 |
| 40°C | 104°F | 1742 | 1955 | 2189 |
| 50°C | 122°F | 1257 | 1379 | 1514 |
| 60°C | 140°F | 893 | 992 | 1097 |
| 70°C | 158°F | 621 | 726 | 789 |
| 80°C | 176°F | 510 | 541 | 596 |
| 90°C | 194°F | 371 | 409 | 442 |
| 100°C | 212°F | 299 | 314 | 336 |
| 110°C | 230°F | 226 | 247 | 262 |
| 120°C | 248°F | 180 | 192 | 201 |
| 130°C | 266°F | 143 | 153 | 161 |
| 140°C | 284°F | 114 | 124 | 134 |
| 150°C | 302°F | 97 | 101 | 105 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.