2012 Suzuki Equator BaseFACTORY OEM SERVICE PROCEDURE

Rear Window Defogger System: Component Description

REAR WINDOW DEFOGGER SYSTEM REFERENCE CHART

BCM
  • Operates the rear window defogger with the operation of rear window defogger switch.
  • Performs the timer control of rear window defogger.
Rear window defogger relay
  • Operates the rear window defogger and the door mirror defogger (if equipped) with the control signal from BCM.
Rear window defogger switch
  • The rear window defogger switch is turned ON.
  • Turns the indicator lamp ON when detecting the operation of rear window defogger.
Rear window defogger
  • Heats the heating wire with the power supply from the rear window defogger relay to prevent the rear window from fogging up.
Heated mirror relay* Operates the door mirror defogger with the control signal from IPDM E/R. Controlled simultaneously with the rear window defogger relay.
Door mirror defogger* The heating elements heat up when powered by the heated mirror relay to defog the door mirrors or prevent the door mirrors from fogging up.
*:if equipped
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.