2012 Suzuki Equator BaseFACTORY OEM SERVICE PROCEDURE

Front Window Anti-Pinch System

COMPONENT FUNCTION CHART

Component Function
BCM
  • Supplies power supply to power window switch.
  • Controls retained power.
Main power window and door lock/unlock switch Directly controls all power window motor of all doors.
Power window and door lock/unlock switch RH Controls front power window motor RH.
Rear power window switch (crew cab) Controls rear power window motors LH and RH.
Front power window motor LH Starts operating with signals from main power window and door lock/unlock switch.
Front power window motor RH Starts operating with signals from main power window and door lock/unlock switch & power window and door lock/unlock switch RH.
Rear power window motor (crew cab) Starts operating with signals from main power window and door lock/unlock switch & rear power window switch.
Rear door switch upper LH or RH (king cab) Detects door open/close condition and transmits to BCM.
Rear door switch lower LH or RH (king cab)
Front door switch LH or RH
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.