Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Suzuki Kizashi SE, FWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.40 OZS. | 0.13 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.15 LBS. | 0.52 KG | R-134a | S | |||
| Automatic Transmission Fluid | 8.77 QTS. | 8.29 L | SUZUKI CVT Fluid Green or SHELL Green -1V | S | |||
| Brake Fluid | N/A | N/A | Refer to Brake Fluid Cap on your vehicle for correct fluid specification. | S | |||
| Differential Gear Oil | Rear | 1.48 QTS. | 1.4 L | Hypoid Gear Oil API - GL-5 80W-90 Gear Oilk | S | ||
| Engine Coolant | w/Reserve Tank | 6.90 QTS. | 6.52 L | 50/50 mixture of SUZUKI Genuine Coolant or equivalent and demineralized or distilled water | S | ||
| Engine Oil | w/Filter | 4.75 QTS. | 4.49 L | API - SAE 5W-30 | NOTE: The amount of oil required when actually changing oil may somewhat differ from the data depending on various conditions (temperature, viscosity, etc). | S | |
| Engine Oil | w/o Filter | 4.55 QTS. | 4.3 L | API - SAE 5W-30 | NOTE: The amount of oil required when actually changing oil may somewhat differ from the data depending on various conditions (temperature, viscosity, etc). | S | |
| Manual Transmission Fluid | 2.64 QTS. | 2.49 L | SUZUKI Gear Oil 75W-80 | S | |||
| Transfer Case Fluid | 1.90 QTS. | 1.79 L | API - GL-5 80W-90 Gear Oil | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
