Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2010KIZASHI FWD L4-2.4LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONS
2010 Suzuki Kizashi FWD L4-2.4L
System Specifications
2010 Suzuki Kizashi FWD L4-2.4LSECTION System Specifications
Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
Oil pump
Oil pump bolt (M10) (a) 55 Nm (5.6 kg-m, 40.5 lbf-ft)
Oil pump bolt (M8) (b) 25 Nm (2.5 kg-m, 18.5 lbf-ft)
Exhaust manifold
Exhaust manifold bolt (a) 50 Nm (5.1 kg-m, 37.0 lbf-ft)
Exhaust manifold nut (b) 50 Nm (5.1 kg-m, 37.0 lbf-ft)
Water pump bolt 25 Nm (2.5 kg-m, 18.5 lbf-ft)
NOTE:
The specified tightening torque is described in the following.
Air Cleaner Components
Throttle Body and Intake Manifold Components
Cylinder Head Cover Components
Camshaft and Tappet Components
Engine Mountings Components
Timing Chain Cover Components
Timing Chain and Chain Tensioner Components
Valve and Cylinder Head Components
Piston, Piston Ring and Connecting Rod Components
Main Bearing, Crankshaft and Cylinder Block Components
Reference:
For the tightening torque of fastener not specified in this section, refer to Fasteners Information. Fasteners Information
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
Oil pump
Oil pump bolt (M10) (a) 55 Nm (5.6 kg-m, 40.5 lbf-ft)
Oil pump bolt (M8) (b) 25 Nm (2.5 kg-m, 18.5 lbf-ft)
Exhaust manifold
Exhaust manifold bolt (a) 50 Nm (5.1 kg-m, 37.0 lbf-ft)
Exhaust manifold nut (b) 50 Nm (5.1 kg-m, 37.0 lbf-ft)
Water pump bolt 25 Nm (2.5 kg-m, 18.5 lbf-ft)
NOTE:
The specified tightening torque is described in the following.
Air Cleaner Components
Throttle Body and Intake Manifold Components
Cylinder Head Cover Components
Camshaft and Tappet Components
Engine Mountings Components
Timing Chain Cover Components
Timing Chain and Chain Tensioner Components
Valve and Cylinder Head Components
Piston, Piston Ring and Connecting Rod Components
Main Bearing, Crankshaft and Cylinder Block Components
Reference:
For the tightening torque of fastener not specified in this section, refer to Fasteners Information. Fasteners Information
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.