Service Data and Specifications

Fuel Pressure
Fuel pressure at idling Approximately 350 kPa (3.57 kg/cm2, 51 psi)

Idle Speed and Ignition Timing

- Air conditioner switch: OFF
- Electric load: OFF (Lights, heater fan & rear window defogger)
- Steering wheel: Kept in straight-ahead position

Calculated Load Value

Mass Air Flow Sensor

Intake Air Temperature Sensor

Engine Coolant Temperature Sensor

Air Fuel Ratio (A/F) Sensor 1 Heater

Resistance [at 25 °C (77 °F)] 1.80 - 2.44 ohms

Heated Oxygen sensor 2 Heater

Resistance [at 25 °C (77 °F)] 9.9 - 13.3 ohms

Crankshaft Position Sensor (POS)
Refer to [P0335 CKP Sensor (POS)]. P0335

Camshaft Position Sensor (PHASE)
Refer to [P0340, P0345 CMP Sensor (PHASE)]. P0340

Throttle Control Motor

Resistance [at 25 °C (77 °F)] Approximately 1 - 15 ohms

Fuel Injector

Resistance [at 10 - 60 °C (50 - 140 °F)] 11.1 - 14.5 ohms

Fuel Pump

Resistance [at 25 °C (77°F)] 0.2 - 5.0 ohms

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Computers and Control Systems: Specifications

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?