Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Suzuki Reno AutomaticFACTORY OEM SERVICE PROCEDURE
Line Pressure Specification
LINE PRESSURE SPECIFICATION
| Gear Range | Solenoid | Line Pressure | B Port | E Port |
|---|---|---|---|---|
| Park / Neutral | ON | LOW | 90 - 124.7 psi (6.2 - 8.6 bar) | |
| OFF | HIGH | 221.9 - 252.3 psi (15.3 - 17.4 bar) | ||
| Reverse | ON | LOW | 89.9 - 124.7 psi (6.2 - 8.6 bar) | |
| OFF | HIGH | 221.9 - 252.3 psi (15.3 - 17.4 bar) | ||
| Drive | ON | LOW | 90 - 124.7 psi (6.2 - 8.6 bar) | |
| OFF | HIGH | 137.7 - 162.4 psi (9.5 - 11.2 bar) | ||
| 3 | ON | LOW | 90 - 124.7 psi (6.2 - 8.6 bar) | 90 - 124.7 psi (6.2 - 8.6 bar) |
| OFF | HIGH | 221.9 - 252.3 psi (15.3 - 17.4 bar) | 137.7 - 162.4 psi (9.5 - 11.2 bar) | |
| 2 | ON | LOW | 90 - 124.7 psi (6.2 - 8.6 bar) | |
| OFF | HIGH | 137.7 - 162.4 psi (9.5 - 11.2 bar) | ||
| 1 | ON | LOW | 90 - 124.7 psi (6.2 - 8.6 bar) | |
| OFF | HIGH | 221.9 - 252.3 psi (15.3 - 17.4 bar) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
