Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Suzuki Reno AutomaticFACTORY OEM SERVICE PROCEDURE
Battery Specifications
BATTERY SPECIFICATIONS
| Description | Unit | Standard |
|---|---|---|
| Type | - | |
| Capacity | AH | 55 |
| Cold Cranks Amps | CCA | 610 |
| Reserve Capacity Minimum | min | 90 |
| Load Test | A | 300 |
| Minimum Voltage: | ||
| 9.6 | V | 21 °C (70 °F) and above |
| 9.5 | V | 15.6 °C (60 °F) |
| 9.4 | V | 10 °C (50 °F) |
| 9.3 | V | 4.4 °C (40 °F) |
| 9.1 | V | -1.1 °C (30 °F) |
| 8.9 | V | -6.7 °C (20 °F) |
| 8.7 | V | -12.2 °C (10 °F) |
| 8.5 | V | -17.8 °C (0 °F) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.