Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2005XL-7 2WD V6-2.7LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULEDESCRIPTION AND OPERATION
2005 Suzuki XL-7 2WD V6-2.7L
Body Control Module: Description and Operation
2005 Suzuki XL-7 2WD V6-2.7LSECTION Description and Operation
TCM-BCM (WITH A/T ONLY) AND BCM-METER SIGNAL CIRCUIT CONSTRUCTION
Description
- TCM-BCM signal (H27 engine model with A/T only) is a voltage signal (1.6 - 2.5 volts and 2.5 - 3.6 volts) which is outputted from TCM to BCM through the CAN communication line (low and high), based on A/T selector position signal and A/T mode switch position signal from each switches.
- BCM-METER signal is a voltage signal (0 - 12 volts) which is outputted from BCM to combination meter through the signal circuit, based on charging system warning signal, DRL indicator signal, Brake indicator signal, windshield washer level switch signal, light switch cognition, A/T selector position signal (H27 engine model with A/T only) and A/T mode switch position signal (H27 engine model with A/T only) from each switches and controller.
- CPU in combination meter operates charging system warning indicator, DRL indicator, Brake indicator, washer level indicator, A/T selector position indicator (H27 engine model with A/T only) and POWER indicator (H27 engine model with A/T only) by analyzing BCM METER signal.
- If CPU in combination meter detects a malfunction of TCM-BCM signal, it makes each lights in combination meter turn OFF or flashing at the same time as follows when ignition switch is turned to ON position and warn the driver of such occurrence of trouble.
- All A/T selector position indicators turn OFF.
- POWER indicator turns OFF.
- If CPU in combination meter detects a malfunction of BCM-METER signal, it makes each lights in combination meter turn OFF or flashing at the same time as follows when ignition switch is turned to ON position and warn the driver of such occurrence of trouble.
- Charging system warning indicator keep flashing
- DRL indicator keep flashing
- Brake indicator keep flashing
- Washer level indicator keep flashing
- All A/T selector position indicators turn OFF (H27 engine model with A/T only)
- POWER indicator turns OFF (H27 engine model with A/T only)
Description
- TCM-BCM signal (H27 engine model with A/T only) is a voltage signal (1.6 - 2.5 volts and 2.5 - 3.6 volts) which is outputted from TCM to BCM through the CAN communication line (low and high), based on A/T selector position signal and A/T mode switch position signal from each switches.
- BCM-METER signal is a voltage signal (0 - 12 volts) which is outputted from BCM to combination meter through the signal circuit, based on charging system warning signal, DRL indicator signal, Brake indicator signal, windshield washer level switch signal, light switch cognition, A/T selector position signal (H27 engine model with A/T only) and A/T mode switch position signal (H27 engine model with A/T only) from each switches and controller.
- CPU in combination meter operates charging system warning indicator, DRL indicator, Brake indicator, washer level indicator, A/T selector position indicator (H27 engine model with A/T only) and POWER indicator (H27 engine model with A/T only) by analyzing BCM METER signal.
- If CPU in combination meter detects a malfunction of TCM-BCM signal, it makes each lights in combination meter turn OFF or flashing at the same time as follows when ignition switch is turned to ON position and warn the driver of such occurrence of trouble.
- All A/T selector position indicators turn OFF.
- POWER indicator turns OFF.
- If CPU in combination meter detects a malfunction of BCM-METER signal, it makes each lights in combination meter turn OFF or flashing at the same time as follows when ignition switch is turned to ON position and warn the driver of such occurrence of trouble.
- Charging system warning indicator keep flashing
- DRL indicator keep flashing
- Brake indicator keep flashing
- Washer level indicator keep flashing
- All A/T selector position indicators turn OFF (H27 engine model with A/T only)
- POWER indicator turns OFF (H27 engine model with A/T only)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.