Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2005SWIFT +REPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENT SYSTEMREPAIR INSTRUCTIONSFRONT TOE ADJUSTMENT
2005 Suzuki Swift +
Front Toe Adjustment
2005 Suzuki Swift +SECTION Front Toe Adjustment
- Loosen the right and the left rod lock bolts.
- Turn the right and the left tie rod adjusters to align the toe to 0 degrees +/-10 minutes.
- Tighten the tie rod lock bolts.
Tighten: Tighten the tie rod lock bolts to 64 N.m (47 lb ft).
IMPORTANT:
In this adjustment, the right and left tie rods must be equal in length.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.