Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2005SWIFT +REPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSBATTERY, CHARGING SYSTEM AND STARTING SYSTEMSPECIFICATIONSGENERAL SPECIFICATIONS
2005 Suzuki Swift +
General Specifications
2005 Suzuki Swift +SECTION General Specifications
General Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery | ||
|
410 Cold Cranking Amps | |
|
550 Cold Cranking Amps | |
Alternator
|
85 A | |
Alternator
|
75 A | |
Starter-Manual (No-Load Test Current Draw)
|
0.8 kW Maximum 53 A (Drive Pinion Speed at Minimum 5,000 RPM, 11.5 V |
|
Starter-Automatic (No-Load Test Current Draw)
|
1.2 kW Maximum 90 A (Drive Pinion Speed at Minimum 2,600 RPM, 11.5 V |
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.