Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2005 Suzuki Reno EX
Quick Lookups: Fluids
2005 Suzuki Reno EXSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 7.00 OZS. | 0.2 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.41 LBS. | 0.63 KG | R-134a | S | |||
| Automatic Transmission Fluid | 7.30 QTS. | 6.9 L | Automatic Transmission Fluid ESSO Type LT71141 or Automatic Transmission Fluid H50235 | S | |||
| Brake Fluid | 0.53 QTS. | 0.5 L | DOT 3 or DOT 4 Brake Fluid | Refer to Brake Fluid Cap on your vehicle for correct fluid specification. | S | ||
| Engine Coolant | 7.90 QTS. | 7.47 L | Silicate Based Coolant | S | |||
| Engine Oil | 4.20 QTS. | 3.97 L | API - SAE 5W-30 | If it is going to be -4Deg.F ( -20Deg.C) or above and SAE 5W-30 is not available, you may use SAE 10W-30. | S | ||
| Fuel Tank | 14.50 GALS. | 54.88 L | S | ||||
| Manual Transmission Fluid | 1.90 QTS. | 1.79 L | SAE 80W | Extremely cold area: SAE 75W-90. | S | ||
| Power Steering Fluid | 1.20 QTS. | 1.13 L | Automatic Transmission Fluid DEXRON II D or DEXRON III | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.