Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Suzuki XL-7 Base, 4WDFACTORY OEM SERVICE PROCEDURE
Engine Controls - Service & Adjustment Specifications: Capacities
NOTE:
Refill capacities are approximate. Correct fluid level should be determined by mark on dipstick, if applicable.
FLUID CAPACITIES
| Application | Qts. (L) | |||
|---|---|---|---|---|
| Automatic Transaxle/Transmission (Dexron-III) | ||||
| Aerio | ||||
| Inital Fill | 6.6 (6.2) | |||
| Drain & Refill | 3.1 (2.9) | |||
| Grand Vitara, Vitara & XL-7 | ||||
| RWD | ||||
| Inital Fill | 7.8 (7.4) | |||
| Drain & Refill | 3.0 (2.8) | |||
| 4WD | ||||
| Inital Fill | 7.5 (7.1) | |||
| Drain & Refill | 2.7 (2.5) | |||
| Cooling System (Includes Heater) | ||||
| Aerio | 6.8 (6.4) | |||
| Grand Vitara & XL-7 | 8.7 (8.2) | |||
| Vitara | 5.9 (5.6) | |||
| Crankcase (Includes Filter) | ||||
| Aerio | 5.0 (4.7) | |||
| Grand Vitara & XL-7 | 5.8 (5.5) | |||
| Vitara | 5.5 (5.2) | |||
| Differential (SAE 75W-90 API GL-5 Gear Oil) | ||||
| Grand Vitara & Vitara | ||||
| Front | 1.1 (1.0) | |||
| Rear | 2.3 (2.2) | |||
| XL-7 | ||||
| Front | 1.1 (1.0) | |||
| Rear | 2.7 (2.5) | |||
| Manual Transaxle (SAE 75W-90 API GL-4 Gear Oil) | ||||
| Aerio | 2.1 (2.0) | |||
| Manual Transmission (SAE 75W-90 API GL-4 Gear Oil) | ||||
| Grand Vitara | 2.8 (2.6) | |||
| Vitara | 1.7 (1.8) | |||
| XL-7 | 2.4 (2.3) | |||
| Transfer Case (SAE 75W-90 API GL-4 Gear Oil) | ||||
| Grand Vitara & Vitara | 1.8 (1.7) | |||
| XL-7 | ||||
| RWD | 2.3 (2.2) | |||
| 4WD | 1.8 (1.7) | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.