Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Suzuki XL-7 PlusFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/o Rear AC | 3.40 OZS. | 0.1 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/Rear A/C | 4.70 OZS. | 0.13 L | PAG 46 | S | ||
| Air Cond Refrigerant | Front & Rear | 1.75 LBS. | 0.79 KG | R-134a | S | ||
| Air Cond Refrigerant | Front | 1.15 LBS. | 0.52 KG | R-134a | S | ||
| Automatic Transmission Fluid | 4 Spd Trans | 5.30 PTS. | 2.5 L | Automatic Transmission Fluid DEXRON III | When drained. | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 4WD | Front | 2.10 PTS. | 0.99 L | API - GL-5, SAE 80W-90 Hypoid Gear Oil | S | |
| Differential Gear Oil | Rear | 5.30 PTS. | 2.5 L | API - GL-5, SAE 80W-90 Hypoid Gear Oil | S | ||
| Engine Coolant | H27A | 17.30 PTS. | 8.18 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | S | ||
| Engine Oil | w/Filter,H27A | 5.80 QTS. | 5.48 L | API - SAE 5W-30 | S | ||
| Fuel Tank | 16.90 GALS. | 63.97 L | S | ||||
| Manual Transmission Fluid | 5.50 PTS. | 2.6 L | API - GL-4, SAE 75W-90 Gear Oil | S | |||
| Transfer Case Fluid | 4WD | 3.60 PTS. | 1.7 L | API - GL-4, SAE 75W-90 | S | ||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.