Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1999 Suzuki Swift AutomaticFACTORY OEM SERVICE PROCEDURE
Diagnostic Trouble Code (DTC) Identification
DTC IDENTIFICATION
| DTC | System Affected | Condition | ||
|---|---|---|---|---|
| P0106 | MAP Sensor Circuit | Poor MAP Sensor Performance | ||
| P0107 | MAP Sensor Circuit | Low MAP Sensor Circuit Input | ||
| P0108 | MAP Sensor Circuit | High MAP Sensor Circuit Input | ||
| P0111 | IAT Sensor Circuit | Circuit Range/Performance Problem | ||
| P0112 | IAT Sensor Circuit | Low IAT Sensor Circuit Input | ||
| P0113 | IAT Sensor Circuit | High IAT Sensor Circuit Input | ||
| P0116 | ECT Sensor Circuit | Low Coolant Temperature Or Specified Value | ||
| P0117 | ECT Sensor Circuit | Low ECT Sensor Circuit Input | ||
| P0118 | ECT Sensor Circuit | High ECT Sensor Circuit Input | ||
| P0121 | TP Sensor Circuit | Poor TP Sensor Performance | ||
| P0122 | TP Sensor Circuit | Low TP Sensor Circuit Input | ||
| P0123 | TP Sensor Circuit | High TP Sensor Circuit Input | ||
| P0125 | ECT Sensor Circuit | Insufficient Coolant Temperature For Closed Loop Operation | ||
| P0131 | HO2S No. 1 Circuit | Low HO2S No. 1 Circuit Input | ||
| P0132 | HO2S No. 1 Circuit | High HO2S No. 1 Circuit Input | ||
| P0133 | HO2S No. 1 Circuit | Slow Response Of HO2S No. 1 Circuit | ||
| P0134 | HO2S No. 1 Circuit | No HO2S No. 1 Circuit Activity Detected | ||
| P0135 | HO2S No. 1 Heater Circuit | HO2S No. 1 Heater Circuit Malfunction | ||
| P0136 | HO2S No. 2 Circuit | HO2S No. 2 Circuit Malfunction | ||
| P0141 | HO2S No. 2 Heater Circuit | HO2S No. 2 Heater Circuit Malfunction | ||
| P0171 | Fuel System Lean | Total Fuel Trim Is Greater Than Allowed Specification | ||
| P0172 | Fuel System Rich | Total Fuel Trim Is Less Than Allowed Specification | ||
| P0300 | Random Misfire Detected | Electrical Or Mechanical Misfire (Catalyst Damaging) | ||
| P0301 | Cylinder No. 1 Misfire | Electrical Or Mechanical Misfire Common To One Cylinder | ||
| P0302 | Cylinder No. 2 Misfire | Electrical Or Mechanical Misfire Common To One Cylinder | ||
| P0303 | Cylinder No. 3 Misfire | Electrical Or Mechanical Misfire Common To One Cylinder | ||
| P0304 | Cylinder No. 4 Misfire | Electrical Or Mechanical Misfire Common To One Cylinder | ||
| P0335 | CKP Sensor Circuit | No CKP Sensor Signal For 2 Seconds During Engine Cranking | ||
| P0340 | CMP Sensor Circuit | No CMP Sensor Signal (Engine Running) | ||
| P0400 (1) | EGR Flow Malfunction | Excessive Or Insufficient EGR Flow | ||
| P0420 | Catalyst Efficiency Low | HO2S No. 1 & 2 Output Is Similar | ||
| P0440 | EVAP Emission Control System | EVAP System Leak Detected | ||
| P0450 | EVAP System Pressure Sensor | Pressure Sensor Circuit Open Or Shorted To Ground | ||
| P0451 | EVAP Emission Control System | Low Tank Pressure With Engine Running | ||
| P0455 | EVAP Emission Control System | EVAP System Leak Detected (Gross Leak) | ||
| P0461 | Fuel Level Sensor Circuit | Poor Fuel Level Sensor Circuit Performance | ||
| P0463 | Fuel Level Sensor Circuit | High Voltage Input | ||
| P0480 | Radiator Fan Control System | Low Fan Control Relay Terminal Voltage With Low Coolant Temperature | ||
| P0481 (1) | A/C Fan Control System | Low A/C Fan Control Relay Terminal Voltage With Low Coolant Temperature | ||
| P0500 | Vehicle Speed Sensor Malfunction | No Signal During Fuel-Cut | ||
| P0505 | Idle Control System Malfunction | Target Idle Speed Not Obtained | ||
| P0506 | Idle Control System RPM High | Idle RPM Is Lower Than Expected | ||
| P0507 | Idle Control System RPM Low | Idle RPM Is Higher Than Expected | ||
| P0601 | PCM Memory Check Sum Error | Data Write Error | ||
| P0603 | PCM Keep Alive Memory Error | EEPROM Memory Error | ||
| P1410 | Fuel Tank Pressure Control System | Low Voltage Signal With High Fuel Level Reading | ||
| P1450 | Barometric Pressure Sensor | Low Or High Input | ||
| P1451 | Barometric Pressure Sensor | Barometric Pressure Sensor Performance Problem During Cranking | ||
| P1500 | Engine Starter Signal Circuit | No Input Or Constant Input From Starter Signal Circuit | ||
| P1510 | PCM Back-Up Power Supply Malfunction | No Back-Up Power Supply After Engine Start | ||
| P1530 | Ignition Timing Adjustment Switch Circuit | Test Switch Terminal Shorted To Ground | ||
| P1600 (1) | Serial Communication PCM/TCM | No Signal Or Check Sum Error While Engine Running | ||
| P1717 (1) | A/T Drive Range Signal Circuit | No "D" Range Signal During Vehicle Operation | ||
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.