WHEEL ALIGNMENT SPECIFICATIONS

Application

Preferred

Range

Esteem

Camber ⁽¹⁾

Front

-1 To 1

Caster ⁽¹⁾

2.7

0.7 To 4.7

Toe-In ⁽²⁾

Front

0 (0)

-0.08 To 0.08 (-2 To 2)

Rear

0.08 ⁽²⁾

0 To 0.16 (0 To 4)

Toe-Out On Turns

⁽³⁾

Steering Axis Inclination (SAI) ⁽¹⁾

12.6

N/A

Sidekick

Camber ⁽¹⁾

Front

0.5

-0.5 To 1.5

Caster ⁽¹⁾

1.5

0.5 To 2.5

Toe-In ⁽²⁾

Front

.16 (4)

0.08 To 0.24 (2 To 6)

Toe-Out On Turns ⁽¹⁾

Inner

32.5

⁽³⁾

Outer

30.5

⁽³⁾

Steering Axis Inclination (SAI)

⁽³⁾

Swift

Camber ⁽¹⁾

Front

-1 To 1

Rear

-0.5 To 0.5

Caster ⁽¹⁾

1 To 5

Toe-In ⁽²⁾

Front

0.08 ⁽²⁾

0 To 0.16 (0 To 4)

Rear

0.08 ⁽²⁾

0 To 0.16 (0 To 4)

Toe-Out On Turns ⁽¹⁾

Inner

⁽³⁾

Outer

⁽³⁾

Steering Axis Inclination (SAI)

⁽³⁾

X90

Camber ⁽¹⁾

Front

-1 To 1

Caster ⁽¹⁾

1.5

0.5 To 2.5

Toe-In ⁽²⁾

Front

.16 (4)

0.08 To 0.24 (2 To 6)

Toe-Out On Turns ⁽¹⁾

Inner

32.5

⁽³⁾

Outer

30.5

⁽³⁾

Steering Axis Inclination (SAI)

⁽³⁾

⁽¹⁾	Measurement is in degrees.

⁽²⁾	Measurement is in inches (mm).

⁽³⁾	Information not available from manufacturer.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Wheel Alignment Specifications

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?