Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Suzuki Swift AutomaticFACTORY OEM SERVICE PROCEDURE
Starter Specifications
STARTER SPECIFICATIONS (A/T)
| Application | Specification | |
|---|---|---|
| Brush Length | ||
| Standard | .69 (17.5) | |
| Wear Limit | .47 (12.0) | |
| Commutator Outside Diameter | ||
| Standard | 1.16" (29.4 mm) | |
| Wear Limit | 1.13" (28.8 mm) | |
| Armature Maximum Runout | .015" (.40 mm) | |
| Insulator Depth | ||
| Standard Depth | .015-.023" (.40-.60 mm) | |
| Wear Limit | .008" (.20 mm) | |
| Cold Cranking Amperage & Voltage | 300 Amps @ 7.7 Volts | |
| No-Load Maximum Current Draw (At 11 Volts) | 50-75 Amps | |
STARTER SPECIFICATIONS (M/T)
| Application | Specification | |
|---|---|---|
| Brush Length | ||
| Standard | .67 (17.0) | |
| Wear Limit | .45 (11.5) | |
| Commutator Outside Diameter | ||
| Standard | 1.26" (32.0 mm) | |
| Wear Limit | 1.24" (31.4 mm) | |
| Armature Maximum Runout | .015" (.40 mm) | |
| Insulator Depth | ||
| Standard Depth | .015-.023" (.40-.60 mm) | |
| Wear Limit | .008" (.20 mm) | |
| Cold Cranking Amperage & Voltage | 150 Amps @ 9.0 Volts | |
| No-Load Maximum Current Draw (At 11 Volts) | 60 Amps | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.