1989 Suzuki Sidekick JA, AutomaticFACTORY OEM SERVICE PROCEDURE

Air Valve

  1. Remove air valve cap with engine stopped when engine is cold (engine cooling water temperature 140°F (60°C) or lower) and check visually that air valve is open.
  2. Reinstall air valve cap and warm up engine to its normal operating temperature (engine cooling water temperature is 158°F (70°C) or higher).
  3. Remove air valve cap again with engine stopped and check visually that air valve is closed.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.