2025 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 2.5L Eng 2.37 OZS. 0.07 L ND-OIL 12 Approximate capacity. S
Air Cond Refrigerant 2.5L Eng 0.95 LBS. 0.43 KG HFO-1234yf Approximate capacity. S
Automatic Transmission Fluid 2.5L Eng 12.30 QTS. 11.64 L SUBARU CVT Fluid LINEARTRONIC III Approximate capacity. Consult your SUBARU dealer for fluid type. S
Brake Fluid N/A N/A FMVSS No. 116 DOT 3 or DOT 4 Brake Fluid S
Differential Gear Oil 2.5L Eng Front 1.35 QTS. 1.27 L SUBARU Extra MT SAE 75W-80 Approximate capacity. The vehicle is filled at the factory with this type of differential gear oil: SUBARU Extra MT S
Differential Gear Oil 2.5L Eng Rear,VA-Type 0.80 QTS. 0.75 L API - GL-5, SAE 75W-90 Approximate capacity. S
Differential Gear Oil 2.5L Eng Rear,VB-Type 0.80 QTS. 0.75 L API - GL-5, SAE 75W-90 Approximate capacity. S
Engine Coolant 2.5L Eng 9.50 QTS. 8.99 L SUBARU Super Coolant Approximate capacity. S
Engine Oil 2.5L Eng Overhaul 5.40 QTS. 5.11 L ILSAC GF-5 or GF-6A, API - SAE 0W-20 Synthetic Engine Oil If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. S
Engine Oil 2.5L Eng w/Filter 4.40 QTS. 4.16 L ILSAC GF-5 or GF-6A, API - SAE 0W-20 Synthetic Engine Oil If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. S
Engine Oil 2.5L Eng w/o Filter 4.20 QTS. 3.97 L ILSAC GF-5 or GF-6A, API - SAE 0W-20 Synthetic Engine Oil If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. S
Fuel Tank 18.50 GALS. 70.03 L S
Windshield Washer Fluid N/A N/A Windshield Washer Fluid S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.