2025 Subaru Impreza BaseFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 2.37 OZS. 0.07 L ND-OIL12 S
Air Cond Refrigerant 1.05 LBS. 0.47 KG HFO-1234yf S
Automatic Transmission Fluid 2.0L Eng 10.80 QTS. 10.22 L SUBARU CVT Fluid for LINEARTRONIC III Always use specified CVTF or equivalent. Using other fluid except for specified or equivalent will cause malfunction. S
Brake Fluid N/A N/A FMVSS No. 116 DOT 3 or DOT 4 Brake Fluid S
Differential Gear Oil Front 1.40 QTS. 1.32 L SUBARU Extra MT SAE 75W-80 Alternative: GL-5 SAE 75W-90 S
Differential Gear Oil Rear 0.80 QTS. 0.75 L API Classification GL-5 SAE 75W-90 S
Engine Coolant 2.0L Eng 8.40 QTS. 7.94 L SUBARU Super Coolant S
Engine Oil Drain and Refill,w/Filter 4.70 QTS. 4.44 L SAE 0W-16 Synthetic Oil Those with GF-6B certification mark (shield mark) or GF-6A certification mark (starburst mark). If SAE 0W-16 is not available SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. S
Engine Oil Drain and Refill,w/o Filter 4.40 QTS. 4.16 L SAE 0W-16 Synthetic Oil Those with GF-6B certification mark (shield mark) or GF-6A certification mark (starburst mark). If SAE 0W-16 is not available SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. S
Engine Oil Total Capacity,Overhaul 5.40 QTS. 5.11 L SAE 0W-16 Synthetic Oil Those with GF-6B certification mark (shield mark) or GF-6A certification mark (starburst mark). If SAE 0W-16 is not available SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. S
Fuel Tank 16.60 GALS. 62.83 L S
Windshield Washer Fluid N/A N/A Windshield Washer Fluid S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.