Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2024 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE
Freeze Frame Data: List
| Item | Contents | Unit of measure |
|---|---|---|
| Trip Count | Total number of ignition switch ON | Time |
| Count | Count | - |
| Time Count | Elapsed time after ignition switch is turned to ON | ms |
| System Voltage (Auto Start Stop) | Voltage of main power supply | V |
| Engine Speed (Auto Start Stop) | Engine speed | RPM |
| Vehicle Speed | Vehicle speed | km/h or MPH |
| Coolant Temp. | CAN received data (ECM) water temperature | Celsius or Fahrenheit |
| Idle stop request | Auto Start Stop request | - |
| Idle stop evaluation | Judgment of Auto Start Stop | - |
| DC/DC Converter 1 Boost Performance | DC/DC converter 1 boost performance | - |
| DC/DC Converter 1 Input 1 Voltage | DC/DC converter 1 Input 1 voltage | - |
| DC/DC Converter 1 Input 2 Voltage | DC/DC converter 1 Input 2 voltage | - |
| DC/DC Converter 1 Output 1 Voltage | DC/DC converter 1 output 1 voltage | - |
| DC/DC Converter 1 Output 2 Voltage | DC/DC converter 1 output 2 voltage | - |
| DC/DC Converter 1 Circuit 1 Temperature | DC/DC converter 1 circuit 1 temperature | - |
| DC/DC Converter 1 Circuit 2 Temperature | DC/DC converter 1 circuit 2 temperature | - |
| DC/DC Converter 1 Internal Circuit | DC/DC converter 1 internal circuit | - |
| Electric Fluid Pump Performance | Electric oil pump performance | - |
| Electric Fluid Pump Input Voltage | Electric oil pump voltage | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.