2024 Subaru Impreza BaseFACTORY OEM SERVICE PROCEDURE

Fuel Pipe 2

  • 2.0 L model
Fig 1: Fuel Pipe 2 Components Location (2.0 L Model)
G16760343Courtesy of SUBARU OF AMERICA, INC.
(1)  Fuel pipe insulator No. 1 
(2)  Fuel pipe insulator No. 2 
(3)  Fuel pipe insulator No. 3 
(4)  High-pressure fuel delivery pipe ASSY 
(5)  High-pressure fuel delivery pipe 
(6)  Fuel delivery pipe B 
(7)  Gasket 
(8)  High-pressure fuel pump 
(9)  O-ring 
(10)  Fuel pump lifter 
(11)  High-pressure fuel pump case 

Tightening torque: N.m (kgf-m, ft-lb) 

T1: 19 (1.9, 14.0) 

T2: 21 (2.1, 15.5) 

T3: 48 (4.9, 35.4) 

T4  Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>HIGH PRESSURE FUEL DELIVERY PIPE>INSTALLATION .

  • 2.5 L model
Fig 2: Fuel Pipe 2 Components Location (2.5 L Model)
G16760344Courtesy of SUBARU OF AMERICA, INC.
(1)  Fuel pipe insulator No. 1 
(2)  Fuel pipe insulator No. 2 
(3)  Fuel pipe insulator No. 3 
(4)  High-pressure fuel delivery pipe ASSY 
(5)  High-pressure fuel delivery pipe 
(6)  Fuel delivery pipe B 
(7)  Gasket 
(8)  High-pressure fuel pump 
(9)  O-ring 
(10)  Fuel pump lifter 
(11)  High-pressure fuel pump case 

Tightening torque: N.m (kgf-m, ft-lb) 

T1: 19 (1.9, 14.0) 

T2: 21 (2.1, 15.5) 

T3: 48 (4.9, 35.4) 

T4  Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>HIGH PRESSURE FUEL DELIVERY PIPE>INSTALLATION .

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.