2023 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

Switch Power Window Sub Rear

  1. Measure the resistance between terminals of the switch power window sub rear.
    • Front seats auto specification
      G12398776Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Standard
      1 - 2
      5 - 4
      OFF Less than 1 Ω
      2 - 3
      3 - 4
      1 - 3
      3 - 5
      1 MΩ or more
      3 - 2
      5 - 4
      Manual up Less than 1 Ω
      1 - 2 1 MΩ or more
      1 - 2
      3 - 4
      Manual down Less than 1 Ω
      4 - 5 1 MΩ or more
    • All seats auto specification
      G12398775Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Standard
      6 - 5 OFF Less than 1 Ω
      2 - 1
      2 - 5
      2 - 6
      1 MΩ or more
      2 - 6 Manual up Less than 1 Ω
      5 - 6
      2 - 5
      1 - 2
      1 MΩ or more
      2 - 6
      1 - 2
      Auto up Less than 1 Ω
      5 - 6
      2 - 5
      1 MΩ or more
      2 - 5 Manual down Less than 1 Ω
      5 - 6
      2 - 6
      1 - 2
      1 MΩ or more
      2 - 5
      1 - 2
      Auto down Less than 1 Ω
      5 - 6
      2 - 6
      1 MΩ or more
  2. Apply battery voltage between the switch power window sub rear terminals to check lighting condition of illumination inside the switch.
    CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.