Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fuel Line
IMPREZA MODEL
- Fuel line 1
(1) Evaporation hose (2) Clip (3) Clip (4) Fuel delivery tube clamp (5) Fuel delivery tube (6) Fuel delivery tube clamp (7) Fuel pipe bracket A (8) Fuel pipe bracket B (9) Fuel pipe ASSY (10) Fuel pipe bracket C (11) Purge tube (12) Retainer (13) Pipe clamp (14) Pipe clamp (15) Pipe clamp (16) Pipe clamp (17) Pipe clamp (18) Pipe clamp (19) Pipe clamp (20) Pipe clamp Tightening torque: N.m (kgf-m, ft-lb)
T: 18 (1.8, 13.3)
- Fuel line 2
(1) Leak check valve ASSY (2) Drain tube (3) Leak check valve ASSY bracket (4) Tube clamp (5) Canister (6) Canister bracket Tightening torque: N.m (kgf-m, ft-lb)
T: 8 (0.8, 5.9)
CROSSTREK MODEL
- Fuel line 1
(1) Evaporation hose (2) Clip (3) Clip (4) Fuel delivery tube clamp (5) Fuel delivery tube (6) Fuel delivery tube clamp (7) Fuel pipe bracket A (8) Fuel pipe bracket B (9) Fuel pipe ASSY (10) Fuel pipe bracket C (11) Purge tube (12) Retainer (13) Pipe clamp (14) Pipe clamp (15) Pipe clamp (16) Pipe clamp (17) Pipe clamp (18) Pipe clamp (19) Pipe clamp (20) Pipe clamp Tightening torque: N.m (kgf-m, ft-lb)
T: 18 (1.8, 13.3)
- Fuel line 2
Courtesy of SUBARU OF AMERICA, INC.
(1) Leak check valve ASSY (2) Drain tube (3) Leak check valve ASSY bracket (4) Tube clamp (5) Canister (6) Canister bracket Tightening torque: N.m (kgf-m, ft-lb)
T: 8 (0.8, 5.9)
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.