Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Subaru Crosstrek Base, Standard TransFACTORY OEM SERVICE PROCEDURE
Fuel Filler Pipe
| (1) | Fuel filler cap |
| (2) | Fuel filler pipe protector |
| (3) | Clip |
| (4) | Neck holder A |
| (5) | Neck holder B |
| (6) | Fuel filler pipe |
| (7) | Drain filter ASSY |
| (8) | Drain filter bracket A |
| (9) | Drain filter bracket B |
| (10) | Drain tube |
| (11) | Tube clamp |
| (12) | Tube clamp |
| (13) | Upper bracket |
| (14) | Lower bracket |
| *If the drain filter bracket A is removed from the drain filter, be sure to replace the drain filter and drain filter bracket A with new parts. | |
Tightening torque: N.m (kgf-m, ft-lb)
T: 7.5 (0.8, 5.5)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.