2023 Subaru BRZ Premium, Automatic TransFACTORY OEM SERVICE PROCEDURE

Select Lever

  1. Check that there is no deformation, cracks or other damages.
  2. Check select lever operation.
    1. Check that the select lever does not shift from "P range" to other ranges.
    2. Check that the select lever shifts from the "P range" to other ranges with the shift lock released.
    3. Start the engine.
    4. Shift to each range and check the following items.
      WARNING: Confirm safety in the vicinity and make sure no person is around the vehicle.
      • The select lever moves smoothly to each range without interference.
      • The position indicator displays correctly.
      • The vehicle moves forward when shifted to "D range".
      • The vehicle moves backward when shifted to "R range".
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.