Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE
Freeze Frame Data: List
| Item | Contents | Standard/Unit | Note | ||
|---|---|---|---|---|---|
| Trip Count | Total number of ignition switch ON | Time | - | ||
| Count | Counter | - | - | ||
| Time Count | Elapsed time after ignition switch is turned to ON | ms | - | ||
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH | km/h | - | ||
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH | km/h | - | ||
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH | km/h | - | ||
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH | km/h | - | ||
| Vehicle Speed | Vehicle speed | km/h | - | ||
| Steering Angle Sensor | Steering angle detected by steering angle sensor | deg | - | ||
| Yaw Rate Sensor | Angle of the vehicle detected by yaw rate sensor | deg/s | - | ||
| Pressure Sensor Output | Brake fluid pressure detected by pressure sensor | bar | - | ||
| Longitudinal G Sensor | Vehicle longitudinal acceleration detected by longitudinal G sensor | m/s^2 | - | ||
| Lateral G Sensor | Vehicle lateral acceleration detected by lateral G sensor | m/s^2 | - | ||
| Voltage of IGN | Voltage supplied to VDCCM and H/U | V | - | ||
| Acceleration Pedal Position | Accelerator pedal opening angle | % | - | ||
| Engine Speed | Engine speed | rpm | - | ||
| FL wheel cylinder pressure sensor output | FL wheel cylinder brake fluid pressure detected by pressure sensor | bar | - | ||
| FR wheel cylinder pressure sensor output | FR wheel cylinder brake fluid pressure detected by pressure sensor | bar | - | ||
| Eyesight Request Pressure | Requested fluid pressure when braking command is sent from EyeSight to VDC | MPa | - | ||
| Brake Booster Gauge Sensor Output | Vacuum pressure value inside brake booster measured by VDC (difference from atmospheric pressure) | kPa | |||
| Steering angle flag | Absolute angle status of steering angle sensor | Recognized or No recognition | - | ||
| EBD Control Flag | Flag of EBD control activation status | ON or OFF | - | ||
| ABS Control Flag | Flag of ABS control activation status | ON or OFF | - | ||
| TCS Control Flag | Flag of TCS control activation status | ON or OFF | - | ||
| VDC Control Flag | Flag of VDC control activation status | ON or OFF | - | ||
| E/G Torque Down Control Stop Flag | Flag of engine control command signal | 1 or 0 | - | ||
| Stop-lamp relay drive signal | Brake light relay drive signal | ON or OFF | - | ||
| X Mode | X mode status (model with X mode) | ON or OFF | - | ||
| E/G torques up Control Stop Flag | Flag of engine control command signal | 1 or 0 | - | ||
| Brake Negative Pressure Warning | Signal for illuminating warning light for brake vacuum pressure fault | 1 or 0 | - | ||
| OHB Control Flag | Flag of OHB(1) control activation status | 1 or 0 | - | ||
| OHB Operation Number | Number of OHB(1) control activation time | Time | - | ||
| Hill Descent Control State | Hill descent control operation status (model with hill descent control) | OFF, Standby, Active or Unstable | |||
| Vectoring Control Flag | Activation status flag of brake-based torque vectoring control | ON or OFF | - | ||
| VDC OFF Status | Operation status of VDC OFF switch | ON or OFF | - | ||
| Brake Light Switch | ON/OFF status of brake | ON or OFF | - | ||
| Detailed DTC(s) | Further categorization of diagnosis code | - | - | ||
| Incline | Incline of the vehicle | % | - | ||
| Engine Torque | Engine torque | Nm | - | ||
| Ambient Temp Sensor | Ambient temperature | °C | - | ||
| Manual Parking Operation | Operation status of parking brake | ON or OFF | - | ||
| Auto Parking Operation | Operation status of parking brake | ON or OFF | - | ||
| Parking Operation when driving | Operation status of parking brake | ON or OFF | - | ||
| Parking Cancel | Operation status of parking brake | ON or OFF | - | ||
| Ignition Signal | Input condition of ignition signal | ON or OFF | - | ||
| Neutral Signal | Input condition of neutral signal | ON or OFF | - | ||
| Reverse Signal | Input condition of reverse signal | ON or OFF | - | ||
| Engine idle flag | Engine running condition | ON or OFF | - | ||
| Door Signal | Input condition of door (4 locations) open/close signal | ON or OFF | - | ||
| Driver Seat Belt Signal | Input condition of driver's seat belt buckle signal | ON or OFF | - | ||
| Auto Vehicle Hold ON Lamp | ON/OFF status of AVH ON indicator light | ON or OFF | - | ||
| EPB Switch Signal | Recognition status of EPB switch | Neutral, Release, Apply or Unknown | - | ||
|
|||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.